Heat Exchanger And Economizer Low Fin Tube ASTM A179 Carbon Steel

• Low Carbon Content: The low carbon content (up to 0.06%) provides good weldability and formability while maintaining adequate strength.
• Seamless Construction: A179 tubes are seamless, which eliminates weak points such as weld seams, enhancing overall strength.
• Fin Design: The low fins are integrally formed on the tube, ensuring a strong bond between the fins and the base tube.

• Temperature Range: Designed for use in low to medium-temperature applications (typically up to 450°C or 842°F).
• Creep Resistance: Performs well in moderate-temperature environments.
• Oxidation Resistance: Moderate oxidation resistance, but prolonged exposure to high temperatures may reduce strength over time.

• Hydrostatic Testing: Tubes are tested hydrostatically to ensure they can withstand required internal pressures.
• Pressure Rating: Depends on wall thickness and diameter, suitable for moderate-pressure applications.

• A179 vs. Stainless Steel: Stainless steel offers higher strength and corrosion resistance but is more expensive.
• A179 vs. Alloy Steels: Alloy steels provide better high-temperature strength but are less cost-effective.

• Made from ASTM A179 low-carbon steel with excellent thermal conductivity
• Low fins (0.8 mm to 1.5 mm) integrally formed on the tube
• Ideal for low to medium-temperature heat exchange applications
• Suitable for non-corrosive or mildly corrosive environments

• Shell-and-tube heat exchangers for power generation, chemical processing, and HVAC
• Economizers in boilers to recover waste heat from flue gases
• Condensers in power plants and refrigeration systems
• Heat exchangers in oil and gas processing
• Evaporators and condensers in refrigeration systems

• Not suitable for highly corrosive environments without protective coatings
• Best for low to medium temperatures (not extreme high-temperature applications)
• Low fins may not provide as much surface area as high-fin tubes

• Consider operating temperature range
• Evaluate environmental corrosiveness
• Determine heat transfer requirements
• Verify pressure rating compatibility

• Regular cleaning to remove fouling or deposits
• Periodic inspection for fin damage or corrosion
• Hydrostatic or pressure testing to ensure integrity

A179 Low Fin Tubes are a cost-effective and efficient solution for heat transfer applications in low to medium-temperature environments. Their low-height fins enhance heat exchange while maintaining a compact design, making them ideal for use in heat exchangers, boilers, condensers, and more. Always consult with a manufacturer or engineer to ensure the right fit for your application.